Anaesthesia Monitor BIO-3A
- Pulse oximeter with ECG unit BIOSCOPE-D
This device stands out by the combination of a pulse oximeter and a separate usable (removable from the monitor) BIOSCOPE-D. Pulse oximeter and BIOSCOPE-D are united to a small compact monitor. The monitor could be used as a desktop model or fastened at an infusion stand by a tripod mount.
The anaesthesia monitor BIO-3A is suitable both for mains and battery operation. It also has built-in rechargeable batteries besides an external power supply. The operation time with fully loaded batteries is about eight hours. The batteries will be loaded with the monitors built-in charger. On the one hand the BIO-3A could be used in an uninterrupted mains operation mode at a permanent location, on the other hand a mobile use is also possible.
The monitor BIO-3 is not developed for bed-sided use. It is suitable for operations while medical specialist staff is in the proximity and can directly react to a triggered alarm.
Optional PC software for BIO-3A
The optional available PC software BIO-3A is the perfect tool to document the data derived from the anaesthesia monitor BIO-3A. So you can see the signals of ECG and plethysmogramm on a larger screen of a PC and watch the trend of heart rate and SpO2 in real time. Certainly it is possible to store the transmitted data for a later processing. The software has a built-in printing function for your documentation. Also is a data export possible.
Minimum requirements for the used PC:
- Operating sytem: Windows 2000 or Windows XP
- Memory: 64 MByte RAM
- Available space on hard disk: 10 MByte plus size for storing measured values
- Drive: CD drive
- Screen resolution: at least 1024 x 768 pixel
- Interface: serial interface (RS232)
Application range:
alarm function for SpO2 and heart rate
acoustic and optical signal for heart rate
due to built-in rechargeable batteries independent of the mains, therefore also suitable for transportable use
no small single devices with unsafe location
nevertheless ECG monitor BIOSCOPE-D also separate usable
data storage on PC
Standard accessories: ECG patient cable, oximeter finger sensor for adults, power supply
Optional accessories: tripod mount, PC software for documentation and evaluation: signal view of ECG and plethysmogramm, trend HR and SpO2, save, print, data export
Please send an email to sales@recomedical.com to ask for pricing.
Operating instructions and software updates you will find here:
Specs
| One-channel recording | |
|---|---|
| Heart-rate: measurement range | 30 … 240 bpm |
| Heart-rate: measurement accuracy | 30 … 150 bpm: ±1 bpm; 151 … 240 bpm: ±2 bpm |
| Sensitivity | 0,25 … 8 mV (automatic level control in 4 steps) |
| Bandwidth | 0.5 … 40 Hz (3dB) |
| Time constant | 0,33 sek |
| Input impedance | 2 MOhm |
| Suppression of mains hum | |
| Markierung von Schrittmacherimpulsen | |
| Marking of pacemaker pulses | |
| Average heart rate | displayed by the LED display; in case ECG is not connected the averaged pulse rate will be displayed (derived by finger sensor) |
| Alarm limits | adjustable over the whole measurement range |
| Oxygen saturation: measurement range | 45 … 99 % |
|---|---|
| Oxygen saturation: accuracy | 70 … 99 %: < 2 % , < 70 %: not specified |
| Pulse rate: measurement range | 30 … 240 bpm |
| Alarm limits | adjustable over the whole measurement range (lower limit value only) |
| Bar graph display | for assessment of quality of pulse signal |
| Sensor | universal hinged finger sensor for adults (other sensors on request) |
| Power supply | battery and mains operation |
|---|---|
| Mains voltage | 230V ±10 %, 50 Hz |
| Running time in battery mode | 6 … 8 h permanent operation |
| Electrical safety; the monitor BIO-3 agrees with: | EN 60601-1 (06.95), EN 60601-1-2 (11.2001), ECG – BF, SpO2 – BF, defi protected, class IIb acc. MDD 93/42/EEC, about medical products (06/93), CE 0123 |
| Dimension | approx. 160 x 180 x 120 mm (w x d x h) |
| Weight | approx. 1.3 kg (incl. BIOSCOPE-D, without accessories) |
